Thursday, April 27, 2017

Detailed Floral Thinlets box

Featuring: Detailed Floral Thinlets, 3D, Box, Grateful Bunch Stamp Set, Photo Tutorial.

As promised I have some measurements and photos for you on how to make the Detailed Floral Thinlets Box from my previous post. Here.


Cardstock: Cucumber Crush and Peekaboo Peach.
Measurements: 26cm x 15cm.
Score - on the 15cm side at 6cm - this will be your base.
Score - on the 26cm side at 1cm, 7cm, 13cm, 19cm, 25cm -

Place your thinlet in the centre of the 7cm and then the 19cm score line and cut out as shown below.

(click on photo to enlarge)

Fold up all the score lines and cut as shown. (Sorry I just realised I didn't put in the picture above to cut the score lines to the 6cm line (on the Base) but you can see in the photo below what I did.

Fold the whole piece in half at the 13cm (middle) score line.
Put Tear and Tape adhesive onto the two ends.
One piece on the outside and the other side put it on the inside as below.

 Fold the top piece that has the Tear and Tape on the Outside under.
 It should now look like this.
 Fold the outside piece over and attach.

Now you have the box shape it is time to fold all the four base pieces together and glue each one down.

 Time for a lid.
The lid is 9cm x 9cm
Scored at 1.4cm on each side.
Cut as shown and glue side pieces.
 Oh yes, I added some colour to the inside on the box this time.
with an insert of Peekaboo Peach.
The insert is 8.5cm x 24cm
Because the insert needs to be just a few millimetres smaller than the outside of the box I worked it on 5.7cm between each score/fold - therefore the measurements below might appear a bit odd but they worked for me.
scored at 5.7cm, 11.4cm, 17.1cm, 22.8cm
A Tip: for placing the insert inside your box. Fold in one corner to make a triangle - slip inside and open out to the square shape.

Then for the decoration of the lid, using Grateful Bunch Stampset and Blossom Bunch Punch.

Of course I didn't stop there...I had to go and make a card to match...
pop back again next time and I will show you what I did with a double Z fold card.

Thanks for stopping by. Vx

Pin It Now!

Monday, April 24, 2017

Grateful for my Blossom Bunch.

Featuring: Detailed Floral Thinlets, Grateful Bunch, Blossom Bunch Punch, Butterfly Basics

A dear friend ended up in hospital a few weeks ago and I wanted to make her a special card using the Detailed Floral Thinlets.
I thought the Sweet Sugarplum and Mint Macaron colours looked bright and cheery.

While I had the thinlets out I thought I would try my hand at making a matching box too.

The lid features the Blossom Bunch Punch and Grateful Bunch flowers stamped in the Sweet Sugarplum and Mint Macaron. Plus a butterfly from Butterfly Basics.

and here is the card...
isn't this pretty? With more of the lovely Grateful Bunch flowers and the Detailed Floral Framelit in Whisper White.
I have cut out the detailed floral framelits in the Sugarplum and used the cut out bits to fill in parts of the white piece. Wink of Stella is added to the flowers for some sparkle.

Some pretty Sweet Sugarplum ribbon and the words from Beautiful You stamp set finish it off nicely.

Grateful Bunch stamps inside.

I have done up some measurements and photos on how I made the box. Will post that up soon so make sure to pop back.
Thanks for stopping by. Vx

Pin It Now!

Tuesday, April 18, 2017

My Everyday Hero

Featuring: Everyday Hero Stamp set and Shadow Box Card.

It was our Wedding Anniversary last week.
I wanted to use the Everyday Hero Set (Occasions Catalogue p.49) and when I saw a card made by Katrina Duffell   making them into Mr. and Mrs. Incredible!  I knew I just had to follow along and make my own.
And I had been seeing Shadow Box Cards on Pinterest and decided to have a go at making one.
I must say it was a bit challenging for me, but I got there in the end. You can find great tutorials on Pinterest and Youtube for these.
I pretty much followed Katrina's great card design.

The background piece was sponged in Real Red, Tangerine Tango, Daffodil Delight.
I created my scene and then t was glued onto the inside of the cardstock frame.
Washi Tape was added to the edges of the frame to help secure it all (and it looks good). lol.

I stamped the City Scape once directly onto the card and coloured it entirely in black with a marker.
Then stamped onto Smokey Slate and Basic Grey and cut out to layer them over the background.

I added a slightly smaller card on the back to serve as a stand as well for my Framed Card.

I was very pleased and proud of this card and Mr.Incredible thought it was great too.

On the Occasion of our Wedding Anniversary I thought I would share an insight on marriage.
#If you can still laugh together so hard that your stomach hurts from laughing then you are probably doing OK.
You are never too old to be silly together. haha.

Pin It Now!

Tuesday, April 11, 2017

Easter treat containers

For those in a hurry...
I maintain that while a container can be cute and appealing it is probably going to be ripped open and thrown away at some point so while I want my little gift to be appealing I also want it to be super quick and easy to put together.

Hence, that great standby the good ol' sour cream container. 
Super easy to make.
Uses up some of my over abundance of designer series paper (and who doesn't love that idea!),
and requires very little in the way of decorating.
Plonk a butterfly or flower or a happy easter greeting on it and you are done.

Or you can upscale with little effort to a carrot as I have.

If you don't own a punch(I used the retired Modern Label),
just three strips of green cardstock 1.5cm x 6cm stapled together with a little greeting over the staple to hide it.
And a flower or butterfly in the middle if you like. (I love using these because I usually have a box of them lying around from other projects and any excuse to use one is good in my books.)

Or you can even go all out and make a cute bunny with just a few ovals and circles
 (punches or framelits) .

I have used stitched framelits for the ears and feet, 1/2 inch circle punch for the cheeks, small heart for the nose and small circle from the owl builder punch for the eyes and mouth.

I have used A Little Foxy Designer Series Paper Stack from the Main Catalogue p.174.
Paper stacks are perfect for this project as you don't need to cut the paper down to size.
Otherwise 15cm x 15cm or thereabouts is a good starting size for your larger designer paper pieces.

On the back side of the paper place some TearNTape along one complete edge.
Cut two more pieces 3-4cm in length.
Place one about 1cm from the Tear n Tape at right angles as shown
and the other piece on the opposite side in the centre.
(Note: I don't measure any of this - just approximates is fine)

 Peel off the long piece of Tape first and attach to the opposite side to make a tube/cylinder shape.

Look for the Tape inside on one end. Have it facing you and push ends together.
Now fill your container.
Repeat process at the other end.
You should have both ends pointing in opposite directions. i.e. when one is sitting flat the other is pointing up.

I have a short video on this container on my Facebook Business Page that you are welcome to visit.
Same name as my blog. Cardsonthetablewithvicki. 

Thanks for hopping by. (play on words there hehe). and Happy Easter
have a great day. Vx

Pin It Now!

Tuesday, April 4, 2017

Doily Daze Craze

(Featured products: Lace Doilies, Dragonfly Dreams, Stencil background technique)

Yes folks, it is true. I am in love with the Lace Doilies (p.51 of the Occasions Catalogue.)
Can ya tell? LOL.

All I did was use my lace doily like a stencil. Placing in slightly off the corner of my 9.5 x 9.5cm white cardstock.

I used mainly four colours but in the last one at the end I only used three.
Using my chosen ink pads and a sponge dauber (or a sponge if you haven't got sponge daubers).
In your mind imagine the doily is cut into quarters.
Ink over the top of the doily about a quarter of its circumference.
Then follow around with each of your colours until your doily is completely coloured.
Move the doily to another corner and repeat the process.
Each of these Black Based cards have the same colours but some are inked heavier than others.
So even using the same colours you can make a totally different looking card.

I have also inked a doily with Watermelon Wonder. Cut it in half and added to the lower part under the greeting.

Ink Colours for the Black base cards: Watermelon Wonder, Rich Razzleberry, Bermuda Bay and Daffodil Delight.

Ink Colours for the Blue/Pink card : Blushing Bride, So Saffron, Marina Mist and Mint Macaron.
I have added some Gold Wink of Stella to the doily background and the dragonfly. The doily under the greeting is completely coloured with Gold Wink of Stella. Oh so pretty! 

Ink Colours for the Watermelon Wonder/Peekaboo Peach card: Peekaboo Peach, Watermelon Wonder, Bermuda Bay.

TIP: If you still have a two-way glue pen (retired) you can dab a few parts of the back of the doily and let it dry. This will give you a bit of stick on your doily to help hold it in place without tearing your card.

Inside view of a couple.


If you are on Facebook you can check out my video for this technique on my
 Facebook business page. 
My business Facebook address is the same name as my blog. Cardsonthetablewithvicki. Pop on over a have a look if you can.

Have a great day and I will be back soon.  Vx

See the Eastern Water Dragon up our tree. Just so long as he stays there and doesn't jump down on top of me when I am walking past. haha.

Pin It Now!